Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)
• for ALTAMURA 1, inlays are available for an additional charge

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• ALTAMURA 1: stainless steel porthole: polished “chrome” or brushed “satin” and black matt; frosted decormat glass, non-tinted glass; porthole diameter: internal: 235 mm; external 350 mm)
• stainless steel panel (fitted on both sides in the rebated STANDARD door leaves only), height 300mm
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)
• for ALTAMURA 1, inlays are available for an additional charge

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• ALTAMURA 1: stainless steel porthole: polished “chrome” or brushed “satin” and black matt; frosted decormat glass, non-tinted glass; porthole diameter: internal: 235 mm; external 350 mm)
• stainless steel panel (fitted on both sides in the rebated STANDARD door leaves only), height 300mm
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass, plain on both sides
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass, plain on both sides
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass, plain on both sides
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass, plain on both sides
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass, plain on both sides
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass, plain on both sides
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass, plain on both sides
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass, plain on both sides
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass, plain on both sides
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass, plain on both sides
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass, plain on both sides
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• MDF stiles and rails covered with two HDF boards in GREKO decors
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards in CPL and PREMIUM facing layer
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• HDF board with a facing layer
• door leaf edge made in the STANDARD technology
• CPL 0.2 & 0.7 laminates available only with the STANDARD edge with the ABS edging in the same colour as the door leaf only or, for an additional charge, with a standard black edge
• edge (in the standard or non-rebated finish) faced with an edging in the same colour as the surface or, optionally, in plain black (black edging with transverse NATUR OAK PREMIUM, a black edge with a transverse structure)

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Glazing:

• tempered frosted Decormat glass as standard, clear or, charged extra, frosted VSG 221 safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• reverse door leaf (unavailable for CPL 0.2 and 0.7)
• solid core filling
• door closer reinforcement
• arm door closer (silver, black, white, brown)
• additional bottom rail (can be trimmed by a customer up to max 8 cm)
• door undercut, air gap undercut or ventilation grille
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• plastic sleeves
• rebated and non-rebated leaf "100" rebated and non-rebated leaf "110"
• frosted VSG 221 laminated glass, plain on both sides
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• black door leaf edge finish
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• ALTAMURA 1 model: LUX inlay
• PL2112 standard + 15% on the door price before surcharges

---

(2) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• door leaves and door frames coated with water-based UV hardened varnish for high resistance to adverse use conditions
• door leaf edge made in standard or non-rebated technology

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Extra Charges:

• reverse door leaf
• solid core filling
• door undercut or air gap undercut
• “100” rebated and non-rebated door leaf
• additional bottom rail (can be trimmed by a customer up to max 8cm )
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• * drop down seal 1)
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 1) (available in six colours)
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• PL2112 standard

---

(1) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• door leaves and door frames coated with water-based UV hardened varnish for high resistance to adverse use conditions
• door leaf edge made in standard or non-rebated technology

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Extra Charges:

• reverse door leaf
• solid core filling
• door undercut or air gap undercut
• “100” rebated and non-rebated door leaf
• additional bottom rail (can be trimmed by a customer up to max 8cm )
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• * drop down seal 1)
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 1) (available in six colours)
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• PL2112 standard

---

(1) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• door leaves and door frames coated with water-based UV hardened varnish for high resistance to adverse use conditions
• door leaf edge made in standard or non-rebated technology

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Extra Charges:

• reverse door leaf
• solid core filling
• door undercut or air gap undercut
• “100” rebated and non-rebated door leaf
• additional bottom rail (can be trimmed by a customer up to max 8cm )
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• * drop down seal 1)
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 1) (available in six colours)
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• PL2112 standard

---

(1) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• door leaves and door frames coated with water-based UV hardened varnish for high resistance to adverse use conditions
• door leaf edge made in standard or non-rebated technology

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Extra Charges:

• reverse door leaf
• solid core filling
• door undercut or air gap undercut
• “100” rebated and non-rebated door leaf
• additional bottom rail (can be trimmed by a customer up to max 8cm )
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• * drop down seal 1)
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 1) (available in six colours)
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• PL2112 standard

---

(1) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated, non-rebated or reverse door leaf
• internal timber stiles and top rail, MDF bottom rail, covered with two HDF boards
• rigid honeycomb infill or solid core infill for additional charge
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Finishing:

• door leaves and door frames coated with water-based UV hardened varnish for high resistance to adverse use conditions
• door leaf edge made in standard or non-rebated technology

Hardware:

• three pin mortise hinges in a rebated door leaf
• three concealed hinges in the non-adjacent leaf and two hinges in the reverse leaf in silver (black or golden against an extra charge); hinges are supplied and priced with the door frame
• a lever tumbler lock in the rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in the non-rebated and reverse door leaves, thumb turn cylinder, economy or silver with a blockade or, optionally, for an additional charge, a black or golden magnetic lock

Extra Charges:

• reverse door leaf
• solid core filling
• door undercut or air gap undercut
• “100” rebated and non-rebated door leaf
• additional bottom rail (can be trimmed by a customer up to max 8cm )
• metal round or square ventilation sleeves (4 pcs); brushed nickel or patina finish in white or black
• * drop down seal 1)
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 1) (available in six colours)
• “100” rebated and non-rebated door leaf
• drop down seal 2)
• metal hinge casings in the rebated door leaf (brushed nickel, patina, polished chrome, polished brass, white and black)
• can be replaced with a black or golden magnetic lock for non-rebated and reverse leaves
• magnetic stop (buffer) 2) (available in six colours)
• PL2112 standard

---

(1) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated or non-rebated door leaf made in the STILE panelled technology
• MDF stiles and rails covered with the PREMIUM facing
• glulam laminated stiles covered with HDF and MDF boards 2)
• 16 mm thick HDF panels with PREMIUM facing layer (vertical grain direction)
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Hardware:

• rebated door leaves: three silver 2-pin hinges adjusted horizontally
• three concealed hinges in a non-rebated leaf, silver (optionally black - subject to an additional charge); hinges supplied with and included in the price of the door frame
• lever tumbler lock in a rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in a non-rebated door leaf, thumb turn cylinder, economy, with a silver blockade; optionally, for an additional charge, a black or gold magnetic lock

Glazing:

• frosted decormat glass, 4 mm, or custom-made frosted or black VSG 221 laminated safety glass, plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• factory pre-drilled through holes for handles (split handles) ordered together with the door leaf
• door undercut or air gap undercut
• plastic woodgrain sleeves (4 pcs)
• round and square metal sleeves (4 pcs); brushed nickel or patina finish in white and black
• ventilation grille (only for door leaf widths of 80, 90, 100)
• “100” rebated and non-rebated door leaf
• metal hinge casings in rebated door leaf (colour: brushed nickel, patina, glossy chrome, glossy brass, white and black)
• drop down seal 1)
• can be replaced with a black or golden magnetic lock for non-rebated door leaves
• magnetic stop (buffer) 1) (available in six colours)
• glulam stiles 2)

---

(1) a stop will not allow a drop-down seal and a door undercut to be used, and vice versa
(2) Glulam stiles covered with HDF and MDF boards available for an extra charge in ARALIA 1, EWODIA1,2,4 models for NATUR OAK PREMIUM, GRAPHITE ASH PREMIUM, GREY MAPLE PREMIUM

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated or non-rebated door leaf made in the STILE panelled technology
• MDF stiles and rails covered with the GREKO, PREMIUM, ST CPL facings or ST CPL laminate with the AntiFinger coating
• glulam laminated stiles covered with HDF and MDF boards 4)
• 4 mm thick HDF panels with GREKO, CPL or PREMIUM finish
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Hardware:

• rebated door leaves: three silver 2-pin hinges adjusted horizontally
• three concealed hinges in a non-rebated leaf, silver (optionally black - subject to an additional charge); hinges supplied with and included in the price of the door frame
• lever tumbler lock in a rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in a non-rebated door leaf, thumb turn cylinder, economy, with a silver blockade; optionally, for an additional charge, a black or gold magnetic lock

Glazing:

• tempered 4 mm glass, frosted or clear as a standard and, for an additional charge, laminated VSG 221 safety glass frosted or black plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• factory pre-drilled through holes for handles (split handles) ordered together with the door leaf
• door undercut or air gap undercut
• plastic woodgrain sleeves (4 pcs)
• round and square metal sleeves (4 pcs); brushed nickel or patina finish in white and black
• ventilation grille (only for door leaf widths of 80, 90, 100)
• “100” rebated and non-rebated door leaf
• metal hinge casings in rebated door leaf (colour: brushed nickel, patina, glossy chrome, glossy brass, white and black)
• VSG 221 laminated safety glass, plain on both sides, frosted or black
• drop down seal 2)
• can be replaced with a black or golden magnetic lock for non-rebated door leaves
• magnetic stop (buffer) 2) (available in six colours)
• glulam stiles 4)

---

(2) A stop will not allow a drop down seal and a door undercut to be used, and vice versa
(4) Glulam stiles covered with HDF and MDF boards available for WHITE PREMIUM, NATUR OAK PREMIUM, GRAPHITE ASH PREMIUM, GREY MAPLE PREMIUM, OAK ST CPL at extra charge

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated or non-rebated door leaf made in the STILE panelled technology
• MDF stiles and rails covered with the GREKO, PREMIUM, ST CPL facings or ST CPL laminate with the AntiFinger coating
• glulam laminated stiles covered with HDF and MDF boards 4)
• 4 mm thick HDF panels with GREKO, CPL or PREMIUM finish
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Hardware:

• rebated door leaves: three silver 2-pin hinges adjusted horizontally
• three concealed hinges in a non-rebated leaf, silver (optionally black - subject to an additional charge); hinges supplied with and included in the price of the door frame
• lever tumbler lock in a rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in a non-rebated door leaf, thumb turn cylinder, economy, with a silver blockade; optionally, for an additional charge, a black or gold magnetic lock

Glazing:

• tempered 4 mm glass, frosted or clear as a standard and, for an additional charge, laminated VSG 221 safety glass frosted or black plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• factory pre-drilled through holes for handles (split handles) ordered together with the door leaf
• door undercut or air gap undercut
• plastic woodgrain sleeves (4 pcs)
• round and square metal sleeves (4 pcs); brushed nickel or patina finish in white and black
• ventilation grille (only for door leaf widths of 80, 90, 100)
• “100” rebated and non-rebated door leaf
• metal hinge casings in rebated door leaf (colour: brushed nickel, patina, glossy chrome, glossy brass, white and black)
• VSG 221 laminated safety glass, plain on both sides, frosted or black
• drop down seal 2)
• can be replaced with a black or golden magnetic lock for non-rebated door leaves
• magnetic stop (buffer) 2) (available in six colours)
• glulam stiles 4)

---

(2) A stop will not allow a drop down seal and a door undercut to be used, and vice versa
(4) Glulam stiles covered with HDF and MDF boards available for WHITE PREMIUM, NATUR OAK PREMIUM, GRAPHITE ASH PREMIUM, GREY MAPLE PREMIUM, OAK ST CPL at extra charge

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated or non-rebated door leaf made in the STILE panelled technology
• MDF stiles and rails covered with the GREKO, PREMIUM, ST CPL facings or ST CPL laminate with the AntiFinger coating
• glulam laminated stiles covered with HDF and MDF boards 4)
• 4 mm thick HDF panels with GREKO, CPL or PREMIUM finish
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Hardware:

• rebated door leaves: three silver 2-pin hinges adjusted horizontally
• three concealed hinges in a non-rebated leaf, silver (optionally black - subject to an additional charge); hinges supplied with and included in the price of the door frame
• lever tumbler lock in a rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in a non-rebated door leaf, thumb turn cylinder, economy, with a silver blockade; optionally, for an additional charge, a black or gold magnetic lock

Glazing:

• tempered 4 mm glass, frosted or clear as a standard and, for an additional charge, laminated VSG 221 safety glass frosted or black plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• factory pre-drilled through holes for handles (split handles) ordered together with the door leaf
• door undercut or air gap undercut
• plastic woodgrain sleeves (4 pcs)
• round and square metal sleeves (4 pcs); brushed nickel or patina finish in white and black
• ventilation grille (only for door leaf widths of 80, 90, 100)
• “100” rebated and non-rebated door leaf
• metal hinge casings in rebated door leaf (colour: brushed nickel, patina, glossy chrome, glossy brass, white and black)
• VSG 221 laminated safety glass, plain on both sides, frosted or black
• drop down seal 2)
• can be replaced with a black or golden magnetic lock for non-rebated door leaves
• magnetic stop (buffer) 2) (available in six colours)
• glulam stiles 4)

---

(2) A stop will not allow a drop down seal and a door undercut to be used, and vice versa
(4) Glulam stiles covered with HDF and MDF boards available for WHITE PREMIUM, NATUR OAK PREMIUM, GRAPHITE ASH PREMIUM, GREY MAPLE PREMIUM, OAK ST CPL at extra charge

Internal Door Kits

---

Book ERKADO Door Kit Appointment

---

Full kit includes:

• Door leaf
• frame
• hinges
• handle

Construction:

• rebated or non-rebated door leaf made in the STILE panelled technology
• MDF stiles and rails covered with the GREKO, PREMIUM, ST CPL facings or ST CPL laminate with the AntiFinger coating
• glulam laminated stiles covered with HDF and MDF boards 4)
• 4 mm thick HDF panels with GREKO, CPL or PREMIUM finish
• optional door frame extension panels and a crosshead with pilasters are available for an additional charge
• the door can be trimmed by a customer

Hardware:

• rebated door leaves: three silver 2-pin hinges adjusted horizontally
• three concealed hinges in a non-rebated leaf, silver (optionally black - subject to an additional charge); hinges supplied with and included in the price of the door frame
• lever tumbler lock in a rebated door leaf and a key-locked magnetic lock (lever tumbler lock as an option) in a non-rebated door leaf, thumb turn cylinder, economy, with a silver blockade; optionally, for an additional charge, a black or gold magnetic lock

Glazing:

• tempered 4 mm glass, frosted or clear as a standard and, for an additional charge, laminated VSG 221 safety glass frosted or black plain on both sides
• possibility to change the glazing side to REVERSE (standard glazing for OBVERSE)

Extra Charges:

• factory pre-drilled through holes for handles (split handles) ordered together with the door leaf
• door undercut or air gap undercut
• plastic woodgrain sleeves (4 pcs)
• round and square metal sleeves (4 pcs); brushed nickel or patina finish in white and black
• ventilation grille (only for door leaf widths of 80, 90, 100)
• “100” rebated and non-rebated door leaf
• metal hinge casings in rebated door leaf (colour: brushed nickel, patina, glossy chrome, glossy brass, white and black)
• VSG 221 laminated safety glass, plain on both sides, frosted or black
• drop down seal 2)
• can be replaced with a black or golden magnetic lock for non-rebated door leaves
• magnetic stop (buffer) 2) (available in six colours)
• glulam stiles 4)

---

(2) A stop will not allow a drop down seal and a door undercut to be used, and vice versa
(4) Glulam stiles covered with HDF and MDF boards available for WHITE PREMIUM, NATUR OAK PREMIUM, GRAPHITE ASH PREMIUM, GREY MAPLE PREMIUM, OAK ST CPL at extra charge